Rust-Oleum Industrial
Floorcoat PU Primer 5L

BN48288005F
Suitable for power floated concrete as the primer is for dense substrates.
Floorcoat PU Primer
Share...

In detail

Rust-Oleum Floorcoat PU Primer is suitable for power floated concrete as the primer is for dense substrates. 

This product improves the adhesion when working with 7200 Floorcoat PU.

Size
5L 
Application Methods
Brush, Roller
Coverage
Up to 10sq/m per litre 
Touch dry
4-8 hours 
Recoatable
12-24 hours 

* Colours on screen may vary from actual paint

Additional information

Surface Preparation

Remove oil, grease and other contaminants with Rustoleum ND14 Cleaner/Degreaser or high pressure (steam) cleaning in combination with appropriate detergents. Sand old intact coatings to roughen the surface in order to establish a good adhesion. Check the compatibility with old intact coatings. During application the surface should be dry and clean.

On porous concrete a first coat should be applied with 7200 diluted with ± 5% Thinner 633. Ensure concrete is at least 28 days old and moisture content lower than 6%. Remove curing compounds by means of dust free blasting or acid etching with Rust-Oleum SE108.

Application

  • Apply in a dry and well ventilated area.
  • Application by brush: Dilute sparingly, if required, with 5% volume Thinner 633.
  • Application by roller: Dilute sparingly, if required, with 5% volume Thinner 633. In case of roller application it can be necessary to apply 2 coats in order to obtain the recommended film thickness.
  • Application by spray: Thin with max. 10% volume Thinner 641. Gravity cup and pressure cup. Tip size: 1.0 -1.5 mm. Atomising pressure: 2 – 4 bar.