Epoxyshield Cleaner Degreaser 2901.5 5L
In detail
Cleaner/Degreaser for floors a concentrated, alkaline, non-flammable, virtually odour-free cleaning/degreasing solution.
- Size
- 5L
Data sheets
Additional information
Surface Preparation
Remove oil, grease and other contaminations with Rust-Oleum 2901 EpoxyShield Cleaner/Degreaser for floors or high pressure- (steam) cleaning in combination with appropriate detergents. Sand old intact coatings to roughen the surface in order to establish a good adhesion. Check the compatibility with old intact coatings. During application the surface should be dry and clean. On porous concrete a first coat should be applied with 7100 diluted with an addition of approximately 10% volume 7301. Remove curing compounds by means of dust free blasting.
Application
- Apply with a brush or roller.
- Thin sparingly if required with 10% volume.
Clean Up
Clean equipment immediately after use.
