5500 High Build White 4L
In detail
Hygienic tile-like coating for floors and walls. Approved for direct dry food contact at room temperature or below. Provides excellent protection against detergents, animal fats, water, brine and other harsh liquids as encountered in food plants.
- Size
- 4L
- Coverage
- Up to 10sq/m per litre
- VOC level
- Low
- Thinning
- Do not thin
- Touch dry
- Over 24 hours
- Recoatable
- Over 24 hours
- Scrubbability
- Washable
- Colour
- White
- Finish
- Gloss
- Cleanup
- Rust-Oleum Thinner 160
Available colours
Rustoleum 5500 High Build White is available in 1 colours from the Rustoleum Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Additional information
Surface Preparation
Remove grease, oil and all other surface contaminants by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Sand intact coatings to roughen the surface slightly. The surface must be clean and dry during application.
Concrete and masonry: New concrete or masonry should dry and cure for at least 30 days before applying the coating system. Remove laitance, loose and unsound concrete or deteriorated coatings preferably by abrasive blasting and repair surface defects with 5180 Epoxy Repair Mortar or Epoxy Putty 5412. Very dense and smooth concrete should be abrasive blasted or primed with Super Adhesive 3333 or 3366.
Steel: Remove loose rust, rust scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-1 : 1988), blast profile max. 100 µm. For immersion purposes, prepare to Sa 3 (ISO 8501-01 : 1988), blast profile max. 75 µm.
Application
- Temperature of material between 10 and 20°C, air and substrate between 10 and 35°C and relative humidity below 85%.
- The substrate temperature must be at least 3°C above dew point.
- Application by brush: Thinning not recommended. Use natural bristles, longhair brushes. Preferably use disposable brushes.
- Application by roller: Thinning not recommended. Use medium nap, 12mm polyester rollers. For textured surfaces use long nap 14-18mm rollers. Preferably use disposable rollers.
