Menu
Shopping basket - 0 item(s) 0

Rustoleum
5200 Epoxyshield Ultra RAL7035 (Ready Mixed) 5L

BN4941010F
FREE next working day delivery available
£118.51 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Single pack water based floor paint for light traffic areas.
Trustpilot
5200 Epoxyshield Ultra RAL7035 (Ready Mixed)
  • 5200 Epoxyshield Ultra RAL7035 (Ready Mixed)
Share...

In detail

Rust-Oleum 5200 Epoxyshield Ultra is quick-drying single pack water-based floor coating (epoxy-modified acrylic) for light to medium duty (normal foot traffic/limited vehicular traffic). 

Easy to apply, touch dry after just 2 hours and gives a satin-matt finish. Good resistance to diesel, motor oil, coolant fluid, various household chemicals and most types of tyre. Touch dry: 2 hours, recoatable 6 hours, safe to walk on 16 hours, park a vehicle: after 7 days.

EpoxyShield 5200 ULTRA can be applied on concrete floors which are completely clean, dry and treated with EpoxyShield Sealer 5220. Application is by brush or roller with coverage up to 9sq/m per litre.

Size
5L 
Application Methods
Brush, Roller
Coverage
Up to 10sq/m per litre 
VOC level
Medium 
Thinning
Not required 
Touch dry
1-4 hours 
Recoatable
4-8 hours 
Suitable for...
Interior use 
Scrubbability
Washable 
Colour
RAL7035 
Finish
Eggshell 
Cleanup
Water & Detergent 
Base
Water-Based 

Available colours

Rustoleum 5200 Epoxyshield Ultra RAL7035 (Ready Mixed) is available in 1 colours from the Rustoleum Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    EpoxyShield® ULTRA (5200-series)

    Quick-drying single pack water-based floor coating (epoxy-modified acrylic) for light to medium duty (normal foot traffic/limited vehicular traffic). Good resistance to diesel, motor oil, coolant fluid, various household chemicals and most types of tyre.

    Surface preparation

    Only apply to completely clean and dry concrete floors. Do not apply to smooth and completely sealed concrete or concrete containing a curing compound. Remove oil, grease and all other contaminants with EpoxyShield Cleaner/Degreaser 2901. Allow new concrete to set for at least 30 days. Remove laitance, loose and damaged concrete by sandblasting or keying with RUST-OLEUM Surfa-Etch 108. Repair all holes and cracks with EpoxyShield concrete repair products.

    Always pre-treat absorbent, porous surfaces with EpoxyShield Sealer 5220. Roughen well-sealed and smooth concrete and treat with Epoxyshield Sealer 5220. Roughen still-intact floor coatings to ensure good adherence. Remove poorly-adhering old coatings with wire brush and sandpaper. During application the surface must be clean and dry.

    Application

    • Apply undiluted in at least two coats using a nylon roller or a polyester brush.
    • For the best results use EpoxyShield Sealer 5220 as first coat.
    • Recommended film thickness: 40 pm dry, (100 pm wet). The temperature of the surface must be at least 3°C above the dew point.

    Related products

    Back