Protector Antifouling Black 5L

Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Suitable for underwater areas of vessels or structures. Good performance. 12-18 months expected life.
Protector Antifouling Black

In detail

Teamac Protector Antifouling is for the underwater area of vessels. Suitable for use with steel, wood, ferro concrete or GRP hulls on both domestic and commercial vessels. Also ideal for underwater structures. Contains cuprous oxide which promotes good performance. 

Expected life is between 12-18 months. For vessels with maximum speeds of 25-30 knots. Application is by brush or roller with coverage of up to 10sq/m per litre. 

Please note: This product is sprayable, but is not permitted except for professional use. The minimum recoat time is 16 hours, dependant of film thickness.

Application Methods
Airless Spray, Brush, Roller
Up to 10sq/m per litre 
VOC level
Teamac Thinners 17 
Touch dry
1-4 hours 
12-24 hours 
Up to 5 years 
Teamac Thinners 17 

Available colours

Teamac Protector Antifouling Black is available in 1 colours from the Teamac Colour Cards.

    Browse colours


    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at

    Additional information

    Surface Preparation

    New steel: Abrasive blast clean to Sa2½ and apply Teamac Metaclor Underwater Primer. If applying onto shop-primed steel ensure that surface is dry and clean, and areas of damaged primer are suitably cleaned prior to the application of the Metaclor.

    Maintenance: Remove all loose and damaged existing coating, and all marine growth. High pressure wash with fresh water. Areas of breakdown should be blasted or power tool cleaned. Touch up with Metaclor Primer to the full existing film thickness. Prior to the application of the full coat ensure that surface is clean and free of all contaminates.


    • Mix well before use.
    • Care must be taken during application that the temperature is above the dew point to avoid any contamination.
    • It may be necessary to apply Protector Antifouling in a number of coats to achieve the specific film thickness.