Protector Antifouling Blue 5L
In detail
Teamac Protector Antifouling is for the underwater area of vessels. Suitable for use with steel, wood, ferro concrete or GRP hulls on both domestic and commercial vessels. Also ideal for underwater structures. It contains cuprous oxide which promotes good performance.
- Size
- 5L
- Application Methods
- Airless Spray, Brush, Roller
- Coverage
- Up to 10sq/m per litre
- VOC level
- High
- Thinning
- Teamac Thinners 17
- Touch dry
- 1-4 hours
- Recoatable
- 12-24 hours
- Lifespan
- Up to 5 years
- Cleanup
- Teamac Thinners 17
Available colours
Teamac Protector Antifouling Blue is available in 1 colours from the Teamac Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Data sheets
Additional information
Surface Preparation
New steel: Abrasive blast clean to Sa2½ and apply Teamac Metaclor Underwater Primer. If applying onto shop-primed steel ensure that surface is dry and clean, and areas of damaged primer are suitably cleaned prior to the application of the Metaclor.
Maintenance: Remove all loose and damaged existing coating, and all marine growth. High pressure wash with fresh water. Areas of breakdown should be blasted or power tool cleaned. Touch up with Metaclor Primer to the full existing film thickness. Prior to the application of the full coat ensure that surface is clean and free of all contaminates.
Application
- Mix well before use.
- Care must be taken during application that the temperature is above the dew point to avoid any contamination.
- It may be necessary to apply Protector Antifouling in a number of coats to achieve the specific film thickness.
