Teamac
Farm Oxide Protective Paint Red 5L

BN533315F
FREE next working day delivery available
£49.43 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

High performance, high opacity, gloss finish for exterior use on structural steel and cladding
Farm Oxide Protective Paint Red
Share...

In detail

Teamac Farm Oxide Paint is a general purpose coating for the protection of exterior metal. Ideal for the maintenance or structural steel and cladding. Suitable applied coat on coat to properly prepared surfaces. 

Dries to a durable and protective gloss finish. Application is by brush, roller or airless spray with coverage up to 13sq/m per litre. Touch dry in 5 hours and recoatable in 12 hours.

Size
5L 
Application Methods
Airless Spray, Brush, Roller
Coverage
Up to 13sq/m per litre 
VOC level
High 
Thinning
Teamac Thinners 14 
Touch dry
4-8 hours 
Recoatable
12-24 hours 
Colour
Red 
Finish
Gloss 
Cleanup
Teamac Thinners 14 

* Colours on screen may vary from actual paint

Available colours

Teamac Farm Oxide Protective Paint Red is available in 1 colours from the Teamac Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    Ensure all surfaces are clean, dry and free from grease, oil and any other contaminants.

    Bare steel should be clean from dust, rust and scale. Blast cleaning to SA 2½ is recommended. If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree. Any oil or grease should be removed with Coo-Var Degreaser before de-rusting. Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts, welds etc. Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.

    Application

    • Mix well before use.
    • Care must be taken during application that the temperature is above the dew point to avoid any contamination.
    • In confined spaces, provide adequate ventilation during application and drying.