- Application Methods
- Up to 20sq/m per litre
- VOC level
- Do not thin
- Touch dry
- 4-8 hours
- 12-24 hours
- Up to 5 years
- Light Oak
- Brush cleaner or White spirit
To get the best results, ensure surfaces to be varnished are sound, clean and dry (new surfaces particularly must be fully dry) before treating.
Remove all paint, varnish and defective coatings.
Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead.
Remove defective glazing material; clean the rebates and any loose or open joints. Replace any rotten wood and troublesome knots with preservative-treated timber.
Brush only. For Health & Safety reasons relating to all solvent-based paints, spray application is not recommended.
As with all solvent-based paints, do not apply at temperatures below 5ºC (as recommended by British Standard BS 6150).
After use, remove as much product as possible from brushes before cleaning with water.