- Application Methods
- Up to 18sq/m per litre
- VOC level
- Not Recommended
- 12-24 hours
- Suitable for...
- Interior use
- Brush cleaner or White spirit
Ensure all surfaces to be varnished are sound, clean, dry and free from dust, grease, polish or any other surface contaminant.
Remove any flaking or cracked varnish. Sound, existing varnish should be rubbed down with fine waterproof abrasive paper, rinsed thoroughly and allowed to dry.
Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
Special precaution should be taken during surface preparation of pre 1960s paint surfaces over wood and metal as they may contain harmful lead.
- Stir thoroughly before use.
- Apply two or more coats of varnish evenly, by good quality brush along the wood grain as required.
- Do not overlap the brush strokes.
Remove as much product as possible from brushes before cleaning.
Clean brushes immediately after use with White Spirit or Turpentine Substitute. Replace lid firmly.
Do not empty product into drains or watercourses.