Dulux Trade
Diamond Glaze Satin 2.5L

HC30525J
FREE next working day delivery available
£99.88 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Water-based. Hardwearing and 10x tougher than standard varnishes. Ideal for high traffic wooden floors.
Share...

In detail

Dulux Trade Diamond Glaze is a hard wearing varnish for interior wooden surfaces.  


Ideal for wooden floors it is more durable and long-lasting compared to standard emulsions to resist water, alcohol and many household chemicals It is low-odour, water-based and recoatable in 2-4 hours.  

Suitable for brush application only with coverage up to 25sq/m per litre. 

Available in clear and a range of 39 colours.

Size
2.5L 
Application Methods
Brush, Roller
Coverage
Over 20sq/m per litre 
VOC level
Medium 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Scrubbability
Washable 
Colour
Clear 
Finish
Satin 
Cleanup
Water & Detergent 
Base
Water-Based 

Available colours

Dulux Trade Diamond Glaze Satin is available in 1 colours from the Dulux Trade Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    To get the best results, ensure surface to be varnished are sound, clean and dry.

    Special precautions should be taken during surface preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead.

    All traces of grease, wax and polish must be completely removed.

    • New or bare wood: Sand the surface in the direction of the grain to remove any imperfections etc and remove residues with a damp lint free cloth.
    • Coated surfaces in a good condition: Sand back to provide a good surface key and to give a uniform appearance. Do not use wood dyes or stains over previous coatings as the adhesion will be poor.
    • Coated surfaces in poor condition: Where the existing coating is defective it must be completely removed and the surface prepared as described for new or bare wood above.

    Application

    • Brush or short pile pohair roller only. Do not spray.
    • Do not use below 10ºC or in areas of high humidity or condensation.

    Clearing Up

    After use, remove as much product as possible from equipment before cleaning with water.