Ronseal
Diamond Hard Floor Varnish Satin 2.5L

HC45101004J
FREE next working day delivery available
£63.56 inc. VAT
Please choose a colour before adding to your basket
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Durable and hardwearing. Ideal for interior wooden floors. Quickly drying allowing completion in just 1 days work.
Diamond Hard Floor Varnish Satin
Share...

In detail

Ronseal Diamond Hard Floor Varnish is a water-based coating for interior wooden surfaces. Ideal for wooden floors around the home where it's durable, hardwearing finish is resistant to knocks, scuffs and spills. 

Quick drying, allowing 3 coats to be applied in just 1 day. Application is by brush with coverage up to 20sq/m per litre. Recoatable in 2 hours. 

Size
2.5L 
Application Methods
Brush
Coverage
Up to 20sq/m per litre 
VOC level
Medium 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Scrubbability
Washable 
Finish
Satin 
Cleanup
Water & Detergent 

Available colours

Ronseal Diamond Hard Floor Varnish Satin is available in 6 colours from the Ronseal Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    Untreated Floors: Punch in all nails and fill holes with an appropriate shade. All traces of old waxes, polishes, oils or paints must be completely removed. Sand the floor, preferably with a machine sander in the direction of the grain. Wood block floors should be sanded twice in two directions at right angles to each other. Start with a medium grade sandpaper and complete with 120 grade sandpaper, ensuring that the edges of the room are well sanded.

    Avoid inhaling dust by wearing a suitable face mask. Allow dust to settle and remove by vacuuming. Wipe over with white spirit and allow to dry thoroughly.

    Previously Varnished or Pre-finished Floors: Ensure that the surface is clean and free from wax, polish or other contaminants. Thoroughly abrade to form a key using 120 grade sandpaper or wet and dry paper. Remove dust by vacuuming and wipe over with white spirit and allow to dry. Varnish in poor condition should be completely removed.

    Test a small area first for coating adhesion and/or compatibility prior to treating the whole floor.

    Application

    • Stir thoroughly prior to use.
    • Apply in a warm well ventilated room.
    • Using a wide brush apply evenly in the direction of the wood grain.
    • Apply to 3-4 boards at a time to avoid overlaps.
    • Apply a minimum of 3 coats leaving two hours between coats. Prior to application of the final coat, lightly rub down with 240 grade abrasive paper, wipe over with a damp cloth and allow to dry.

    Clean Up

    All tools and equipment should be cleaned immediately after use by washing in water and detergent. Remove as much product as possible from tools and equipment before washing.