Rustins
White Knotting 1L

HE2707N
Fast drying, for interior and exterior use on bare knots.
White Knotting
Share...

In detail

Fast drying, for sealing bare knots and resinous and creosoted timber. 

Sandpaper first then apply, but do not sandpaper again once knotting has been applied. 

Size
1L 
Application Methods
Brush
Coverage
Up to 12sq/m per litre 
VOC level
High 
Thinning
Do not thin 
Touch dry
1-4 hours 
Recoatable
Up to 1 hour 
Cleanup
Methylated Spirit 

Additional information

Do not use under dyes, stains, water based varnish and water based paints. If a water based coating is to be used, first seal the knotting with an oil based primer or undercoat, this will prevent the knotting discolouring the coating. Knotting prevents the discolouration of paint and is not designed to hold back excess resin in knots. Any excess resin should be removed using a heat gun prior to decorating.

For sealing knots, resinous and creosoted timber to prevent bleeding through paint film. Sandpaper surface smooth before applying knotting liberally over knots and surrounding area. Do not sandpaper knotting once applied. Resinous and creosoted timber should be sealed completely with 2 coats. Allow 1 hour before priming. Clean brushes with methylated spirits.