Liberon
Finishing Oil 5L

HJ303697F
Nourishes and enhances, for use on interior wood, turned woodwork and toys
Finishing Oil
Share...

In detail

High quality blended oils which will nourish and enhance wood. Can be used on all interior wood, turned woodwork and even wooden toys. It can also be used on kitchen and bathroom worktops, tables and furniture. It is hard wearing, water and heat resistant as well. This product can also be applied to cork, stone and terracotta.

Size
5L 
Application Methods
Brush
Coverage
Up to 12sq/m per litre 
Thinning
Not required 
Recoatable
4-8 hours 
Cleanup
Lint-free cloth 

Additional information

Liberon Finishing Oil is a blend of high quality oils for use on all interior wood, turned woodwork and wooden toys. It is suitable for use on worktops, kitchen tables and bathroom furniture and can also be applied to cork, stone and terracotta.

Preparation
Ensure the surface is bare: remove any wax finishes with Liberon Wax and Polish Remover and any varnish finishes with Liberon Fine Wood Stripper. Clean, dry and ensure the surface is dust free. If required, stain the wood with Liberon Palette Wood Dye before oiling.

Application
Shake well before use. Apply a coat of Liberon Finishing Oil using a brush or lint-free cotton cloth. Allow the oil to penetrate for up to 10 minutes then wipe off all the excess with a clean lint-free cloth, before the surface dries enough to become sticky. Allow to dry for a minimum of 5 hours and apply more coats as required. We recommend a minimum of 3 coats. The more coats applied the higher the sheen and the more durable the finish will be. For best results gently rub with Liberon Ultra Fine Steel Wool (0000) between coats. Furniture items may be finished with Liberon Black Bison Wax for an improved lustre.

Important
Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.

Cleaning and maintenance
Surfaces may be cleaned using a damp cloth and spills should be wiped up immediately. For stubborn stains a mild detergent can be used. Surfaces need to be re-oiled once a year or more, depending upon usage.