Liberon
Home Care Decorative Floor Varnish 2.5L

HJ30381005J
Ideal for decorating and protecting wooden and laminate floors with a contemporary finish , with no need to strip them back to bare wood.
Home Care Decorative Floor Varnish
Share...

In detail

Home ColourCare Decorative Floor Varnish is ideal for decorating and protecting wooden and laminate floors, with no need to strip them back to bare wood. 

With a coverage up to 12sq/m per litre Liberon Home Care Decorative Floor Varnish is touch dry in 1-4 hours and recoatable after 4 hours.

Size
2.5L 
Application Methods
Brush, Roller
Coverage
Up to 12sq/m per litre 
VOC level
Low 
Thinning
Not recommended 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Suitable for...
Interior use 
Scrubbability
Washable 
Colour
Grey Beton 
Finish
Satin 
Cleanup
Water & Detergent 

Available colours

Liberon Home Care Decorative Floor Varnish is available in 6 colours from the Liberon Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    Ensure the surface is clean, dry and free of grease.

    Bare wooden floors: Sand lightly and remove all dust.

    Varnished, pre-varnished or painted wooden floors:

    In good condition: wash, rinse and leave to dry. Sand lightly and remove dust.

    Partially worn condition: sand back to bare wood and remove dust.

    Waxed or oiled wooden floors: remove wax using a cleaner then mechanically sand twice until bare wood is reached. Remove dust carefully.

    Laminate flooring: wash, rinse and leave to dry. Sand lightly and remove dust.

    Any grease or film can stop the paint from adhering properly. Washing the surface is therefore essential. Use a sugar soap cleaner.

    Application

    • Stir before and during use, working around the bottom of the tin to mix thoroughly.
    • Apply the varnish using a soft-bristled brush or 3 to 5mm short pile roller.
    • Apply the varnish in regular, criss-cross strokes and spread evenly. Finish in the direction of the grain.
    • Leave to dry for 3 hours.
    • Apply the second coat of varnish. Apply a third if necessary.
    • Leave to dry for 12 hours.