Repair Care
DRY FLEX®1 2-In-1 180ML

NC940512
£39.17 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

An elastic repair compound in a single cartridge, for very fast interior and exterior timber repairs
DRY FLEX®1 2-In-1
Share...

In detail

An permanently elastic repair compound in a single cartridge, for very fast interior and exterior timber repairs. Ideal for permanent repair of decayed windows, doors, fascias, stairs and furniture, or the filling of cracks, gaps and construction joints. 

Can be sanded or over painted after one hour. A 2-in-1 cartridge for standard skeleton gun. 

For small repairs/ splicing (5-10mm*) and emergency repairs. Cures in 1 hour at 20°C. *Up to 15mm below 10°C.

Size
180ML 

Additional information

Dry Fix 1: Elastic Wood Stabiliser for Very Fast Repairs

Surface Preparation

Check the moisture content of the surface and the condition of the wood. Ensure that all decayed or excessively soft wood and weathered, damaged or burnt wood is completely removed until a sound wood substrate is achieved.

All surfaces must be free of dust, dirt and grease, raised wood fibres and general surface contamination. Remove any paint coatings from the surfaces to be treated and sand back to bare shiny wood. Sand the wood surface before the product is applied.

Application

  • On all applications use a brush to pre treat the affected area with Dry Fix 1 before applying Dry Flex 1.
  • Allow a minimum of 20 minutes and a maximum of 2 hours for the Dry Fix 1 to penetrate the surface of the timber.
  • Remove any excess Dry Fix 1 which has not penetrated into the wood with absorbent paper.
  • Apply Dry Flex 1.

Dry Flex 1: Elastic Compound for Very Fast Repairs and Splicing

Surface Preparation

Check the moisture content of the surface and the condition of the wood. Ensure that all decayed or excessively soft wood and weathered, damaged or burnt wood is completely removed until a sound wood substrate is achieved.

All surfaces must be free of dust, dirt, grease, raised wood fibres and general coatings from the surface contamination. Remove any paint coatings from the surfaces to be treated and sand back to bare shiny wood.