Repair Care
DRY FIX®16 300ML

NC940525
An elastic wood stabiliser to be used in conjunction with DRY FLEX®16
Share...

In detail

An elastic wood stabiliser. This product has low viscosity and is solvent-free. It quickly and effectively penetrates deeply into decayed wood. Has an easy to apply brush application. 

To be applied as a primer coat only in conjunction with DRY FLEX®16. Comprised of 200ML Component A & 100ML Component B.

Size
300ML 

Additional information

Surface Preparation

Check the moisture content of the surface and the condition of the wood. Ensure that all decayed or excessively soft wood and weathered, damaged or burnt wood is completely removed until a sound wood substrate is achieved.

All surfaces must be free of dust, dirt, grease, raised wood fibres and general surface contamination. Remove any paint coatings from the surfaces to be treated and sand back to bare shiny wood. Sand the wood surface before the product is applied.

Application

  • On all applications use a brush to pre treat the affected area with Dry Fix 16 before applying Dry Flex 16.
  • Allow a minimum of 20 minutes and a maximum of 8 hours for the Dry Fix 16 to penetrate the surface of timber.
  • Remove any excess Dry Fix 16 which has not penetrated into the wood with absorbent paper.
  • Apply Dry Flex 16.