Brewers
Premium Glazing & Building Silicone Clear 310ml

NE014010
Perfect adhesion to glass, painted wood & ceramic. Mould resistant and suitable for interior and exterior use.
Premium Glazing & Building Silicone Clear
Share...

In detail

Brewers Premium Glazing & Building Silicone is a premium grade, low modulus, acetoxy silicone for most glazing and building applications. Provides a durable, flexible rubber seal which can accommodate moment of +/- 25%. It has excellent resistance to UV, weathering and most chemicals. It does not crack or harden and is unaffected by vibration.

Typical uses include top sealing in glazing and curtain walling, in refrigeration stores and around worktops. Also adheres without primer to glass, glazed surfaces, porcelain, coated metal, epoxy and polyester panels and finished wood. Can be used to draught proof and insulate.

Size
310ml 
Suitable for...
Interior and exterior use 

Additional information

Directions

Surfaces must be clean, dry and free from dust, grease and other loose material. Cut the cartridge seal and screw on the nozzle which should be cut to your required size. Using a skeleton gun, apply the sealant into the gap or joint ensuring a good solid fill. If required place masking tape along edges, removing within 5 minutes of application. Tool using a spatula wetted with clean water within 5 minutes of application. In deep joints reduce the joint depth to 50% of the joint width using expanding foam or joint backer rod.

Limitations

Among others, it is not recommended for application on concrete, marble, corrosive metals such as: lead, copper and galvanized steel, PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates. Curing is subject to humidity and temperature. Not suitable for aquaria, continuous water immersion or in combination with chlorides. Not suitable for movement joints, natural stone and mirrors. Not recommended for direct contact with the perimeter of insulation glass, the edges of laminated safety glass or in the bedding-in of double glazed units. Yellow can occur in areas closed of UV light. Compatibility and adhesion tests prior to application are recommended. It is the user's responsibility to determine suitability. Store between +5°C and +25°C in cool, dry conditions.