Paintable Sealant & Adhesive ALL-IN-ONE White 290ml

In detail
- Size
- 290ml
- Suitable for...
- Interior and exterior use
Additional information
Directions
Surfaces must be solid, clean, dry and free from grease and dust. Cut the cartridge seal and screw on the nozzle which should be cut to your required size. Using a skeleton gun, apply the sealant into the gap or joint ensuring a good solid fill. If required, place masking tape along edges, removing within 10 minutes of application. Tool using a spatula wetted with clean water within 10 minutes of application. For gluing applications, apply adhesive in vertical lines at a distance approximately 10-20cm. Support the application for at least 24 hours until full curing occurs
Limitations
Among others, it is not recommended for use on PE, PP, PC, PMMA, PTFE, soft plastic, neoprene and bituminous substrates. Curing is subject to humidity and temperature. Not suitable for aquaria, continuous water immersion or in combination with chlorides. Not suitable for movement joints, natural stone and mirrors. Not recommended for direct contact with the perimeter of insulation glass, the edges of laminated safety glass or the bedding-in of double glazed units. Yellow can occur in area closed ofn UV light. Compatibility and adhesion tests prior to application are recommended. It is the users responsibility to determine suitability. Store between +5°C and + 25°C in cool shaded, dry conditions.