Stone & Brick Protector Clear 4L
In detail
Polyvine Stone and Brick Interior and exterior water-based masonry protector and water repellent. A dead flat finish. Protection begins immediately and is complete in approx. 24 hours.
- Size
- 4L
- Application Methods
- Brush, Roller, Spray
- Coverage
- Up to 20sq/m per litre
- Touch dry
- Up to 1 hour
- Colour
- Clear
- Finish
- Dead Flat
* Colours on screen may vary from actual paint
Data sheets
Additional information
Surface Preparation
Ensure the surface to be coated is clean and free from grease, wax or polish and contamination. For stone and brick surfaces clean with power washing, where possible. Allow the surface to fully dry before treating. Any prior surface treatment, such as paint, must first be removed. Remove by scraping, grinding or by applying suitable removers.
Application
- Shake well before use.
- For general applications on masonry, brickwork and stone, a single application will be sufficient.
Clean Up
Any equipment can be cleaned using soap and water before the product dries. Wipe any excess off surfaces with a damp cloth.