Gloss Brilliant White 5L

Oil based, high opacity, gloss finish for interior and exterior woodwork & metalwork
Gloss Brilliant White

In detail

Albany Gloss is a high VOC content gloss finish. It is a washable oil based product that is applied by brush, roller or spray. It is suitable for interior and exterior use. It is touch dry in 4 hours and recoatable after 16-24 hours. Gloss is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing.It can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer and undercoat.

Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Up to 16sq/m per litre 
VOC level
Not Recommended 
Touch dry
1-4 hours 
12-24 hours 
Brilliant White 
Colour type
Brush cleaner or White spirit 

* Colours on screen may vary from actual paint

Additional information

Albany Gloss is suitable for a wide variety of new or previously painted interior and exterior surfaces where a tough, durable and high gloss finish is required. A characteristic of the new technology used in this product is that whiteness intensifies as the paint dries. This product is formulated to the highest quality; however, in order to meet current legislation, in certain circumstances white and very pale colours may yellow over time.


Surfaces must be clean, dry and free from grease or dust. All loose material and defective paint must be removed and any new or bare surfaces should be primed with the appropriate Albany Primer. Surfaces should be thoroughly abraded before application to ensure good adhesion.

Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.


  • Please check for colour accuracy prior to application. C. Brewer & Sons Ltd is not liable for decorating costs caused as a result of an incorrect colour being applied. Always intermix packs for colour consistency.
  • Stir well before use. Apply by brush or roller.
  • For best results apply 2 coats.
  • Avoid using during periods of high humidity or in temperatures below 8°C.
  • One litre covers up to 12-16 sq metres depending upon surface texture, porosity and the method of application. Do not over apply.
  • Touch dry in 6 hours. Recoatable after 16-24 hours. Ensure previous coat is fully dry before application.
  • Clean equipment immediately after use with a proprietary cleaner.