Albany
Non-Drip Gloss Ultra White 2.5L

AA0105001J
Store stocked line
FREE next working day delivery available
£22.99 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Oil based, non drip, gloss finish for interior and exterior woodwork
Non-Drip Gloss Ultra White
  • Non-Drip Gloss Ultra White
  • Non-Drip Gloss Ultra White
  • Non-Drip Gloss Ultra White
Share...

In detail

Albany Non-Drip Gloss is a high VOC content gloss finish. This product is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing. Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer and undercoat.

Non-drip gloss is suitable for a variety of surfaces, for example: New and previously painted timber, all metals (including Galvanised), non-ferrous metals and ferrous metals. Preparation on these surfaces can be found in the data sheet.

A characteristic of the new technology used in this product is that whiteness intensifies as the paint dries. This product is formulated to the highest quality; however to meet current legislation, in certain circumstances may yellow over time.

This solvent-based product is touch dry in 4 hours and recoatable after 16-24 hours.

Size
2.5L 
Application Methods
Brush
Coverage
Up to 12sq/m per litre 
VOC level
High 
Thinning
Not Recommended 
Touch dry
1-4 hours 
Recoatable
12-24 hours 
Suitable for...
Interior and exterior use 
Scrubbability
Washable 
Colour
Ultra White 
Colour type
White 
Finish
Gloss 
Cleanup
Brush cleaner or White spirit 
Base
Solvent-Based 

* Colours on screen may vary from actual paint

Additional information

Albany Non Drip Gloss is easy to use and dries to a high gloss finish. Ideal for wood and metal surfaces both inside and outside.

A characteristic of the new technology used in this product is that whiteness intensifies as the paint dries. This product is formulated to the highest quality; however to meet current legislation, in certain circumstances may yellow over time.

Preparation

Surfaces must be clean, dry and free from grease or dust. All loose material and defective paint must be removed and any new or bare surfaces should be primed with the appropriate Albany Primer. Surfaces should be thoroughly abraded before application to ensure good adhesion. No undercoat is required. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

Application

  • Do not shaker or stir. Pour off any surface liquid. Apply by brush only.
  • For best results apply 2 coats
  • Avoid using during periods of high humidity or in temperatures below 8°C
  • One litre covers up to 12sq metres depending upon surface texture, porosity and the method of applicaition. Do not over apply
  • Touch dry in 6 hours. Recoatable after 16-24 hours. Ensure previous coat is fully dry before application.
  • Current legislation has required a reduction in solvent content which means that white and some very pale shades may, in certain circumstances such as lack of daylight, yellow over time.
  • Clean equipment immediately after use with a proprietary cleaner.

Related products

Back