Albany
Super Gloss Black (Ready Mixed) 1L

AA0142010N
Store stocked line
£24.49 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Water based paint with good flow and opacity, this product has low odour and quick drying. Interior and exterior surfaces.
Share...

In detail

Albany Super Gloss is a water based paint with good flow and opacity, this product has low odour and quick drying making it much faster to apply the next coat. Super Gloss can be used on both interior and exterior surfaces. 

Ideal for where a durable finish is required, offers excellent opacity and stays white for longer compared to solvent based finishes. Touch dry in 2 hours and re-coat time in 4-6 hours.

Size
1L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 15sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
4-8 hours 
Suitable for...
Interior and exterior use 
Colour
Black 
Colour type
Ready Mixed 
Finish
Gloss 
Cleanup
Water & Detergent 
Base
Water-Based 

* Colours on screen may vary from actual paint

Additional information

Albany Super Gloss is a superior water based gloss for interior and exterior surfaces, where a durable finish is required. Offering excellent opacity, Super Gloss stays whiter for longer compared to solvent based finishes.

Preparation

Surfaces must be clean, dry and free from grease or dust. All loose material and defective paint must be removed and any new or bare surfaces should be primed. For best results it is recommended that Albany Super Primer Undercoat be used. Surfaces should be thoroughly abraded before application to ensure good adhesion.

Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

Application

  • Please check for colour accuracy prior to application. C Brewer & Sons is not liable for decorating costs caused as a result of an incorrect colour being applied. Always intermix packs for colour consistency.
  • Stir well before use. Apply by synthetic brush or roller.
  • For best results apply 2 coats.
  • Avoid using during periods of high humidity or in temperatures below 8°C.
  • One litre covers up to 15 sq metres depending upon surface texture, porosity and the method of application.
  • Touch dry in 2 hours. Recoatable after 4-6 hours, in good conditions.
  • Clean equipment immediately after use with water

Transportation and Storage

  • Ensure this pack is stored upright and secure at all times. No liability can be accepted for damage caused by spillage or failure to follow instructions.
  • Do not store below 5°C or above 40°C.