Crown Trade
Full Gloss Brilliant White 5L

AD0101001F
Oil based, high opacity, gloss finish for interior and exterior use
Full Gloss Brilliant White
Share...

In detail

Crown Trade Full Gloss is a high VOC content gloss finish. A washable oil based product that is applied by brush or roller and is suitable for interior and exterior use. 

Touch dry in 4-6 hours and recoatable after 16-24 hours. Gloss is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing. 

Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer and undercoat.

Size
5L 
Application Methods
Brush, Roller
Coverage
Up to 15sq/m per litre 
VOC level
High 
Thinning
Not Recommended 
Touch dry
1-4 hours 
Recoatable
12-24 hours 
Scrubbability
Washable 
Colour
Brilliant White 
Colour type
White 
Finish
Gloss 
Cleanup
Brush cleaner or White spirit 
Base
Oil 

* Colours on screen may vary from actual paint

Additional information

For Interior and Exterior use. Crown Trade's formulation ensures a durable, attractive full gloss finish.

Preparation
Ensure all surfaces are sound, dry, clean and free from dirt, oil, grease or other contamination. Bare surfaces should be primed with the appropriate Crown Trade Primer followed by 1 or 2 coats of Crown Trade Undercoat. Existing paintwork in sound condition should be washed down with a warm water/detergent solution and rubbed down with wet and dry abrasive paper to remove surface contamination and provide a key. Rinse with clean water and apply Crown Trade Undercoat. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. For further information contact our Customer Relations Team.

Application
Stir thoroughly. Always intermix packs for colour consistency. Please check for colour accuracy prior to application. Crown Paints is not liable for decorating costs caused as a result of an incorrect colour being applied. Apply by brush or roller. A characteristic of the new technology used in this product is that whiteness intensifies as the paint dries.

Spreading Capacity
12 - 15m² per litre. Do not over apply.

Drying
In good conditions: Touch dry from 6 hours. Recoatable after 16 - 24 hours. Ensure previous coat is fully dry before application Do not apply when air or substrate temperature is likely to fall below 8°C or when relative humidity is above 80% during application or drying period. Our products are formulated to the highest quality, however recent changes made to meet the reduced solvent levels required by current legislation may in certain circumstances, such as lack of daylight, lead to white and very pale colours yellowing over time.