Quick drying, easy to apply, excellent high opacity, matt finish for interior use. Ideal for new plaster.
Touch dry in 1-2 hours and recoatable after 4 hours. Contract Matt is a decorative coating for use on new plaster surfaces.
Provides a water permeable finish which allows the substrate to dry. Non-wipeable products are not suitable for wiping, washing or scrubbing.
Can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.
- Application Methods
- Airless Spray, Brush, Roller
- Up to 16sq/m per litre
- VOC level
- Touch dry
- 1-4 hours
- 1-4 hours
- Colour type
- Ready mixed
- Water & Detergent
* Colours on screen may vary from actual paint
FOR INTERIOR USE
Crown Trade's formulation provides a high opacity emulsion allowing surfaces to 'breathe' and dry naturally. Suitable for use on new plaster surfaces and application by airless spray.
Ensure all surfaces are sound, dry, clean, and free from dirt, oil, grease or other contamination. On new plaster or highly porous surfaces apply a "mist" coat of Crown Trade Covermatt thinned with 40% clean water. AVOID OVERTHINNING. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. For further information contact our Customer Relations Team.
Stir thoroughly. Crown Trade Covermatt may be applied by brush, roller or spray. 2 coats are normally recommended. On smooth surfaces, use a good quality medium pile roller. With airless spray, use a minimum fluid tip size of 0.013"-0.015" with a pump pressure of approximately 2250W per square inch.
Do not apply when air or substrate temperature are likely to fall below 8°C. Do not apply over glue size, clearcolle or PVA.
Up to 16m2 per litre dependent on surface texture and porosity.
Touch dry in 1-2 hours. Recoatable after 4 hours.
Clean equipment with water immediately after use.
Transportation and Storage
Ensure this pack is stored upright and secure at all times. Protect this pack from extreme hot and cold temperatures.