Fastflow Quick Dry Satin White 2.5L
In detail
- Feels like a traditional Satin
- Quick drying
- Excellent flow
- Interior and Exterior Use
- For best results apply two coats
- Size
- 2.5L
- Application Methods
- Brush, Roller
- Coverage
- Up to 15sq/m per litre
- VOC level
- Low
- Thinning
- Not recommended
- Touch dry
- 1-4 hours
- Recoatable
- 4-8 hours
- Suitable for...
- Interior and exterior use
- Scrubbability
- Washable
- Colour
- White
- Colour type
- White
- Finish
- Satin
- Cleanup
- Water & Detergent
- Base
- Water-Based
* Colours on screen may vary from actual paint
Data sheets
Additional information
Crown Trade Fastflow Quick Dry Satin provides a contemporary satin finish. This water based formulation is suitable for use on correctly prepared interior and exterior joinery and metalwork. Its Breatheasy formulation, which is 99% solvent free, means that it is low odour and quick drying, enabling minimal disruption during decoration. It has excellent flow properties and provides a contemporary satin finish. Provides a solvent based finish with all the benefits of a water based system.
Preparation
Ensure all surfaces are sound, dry, clean and free from dirt, oil, grease or other contamination. Crown Trade Fastflow Quick Dry Primer Undercoat should be used as a basecoat. However, Fastflow Quick Dry Satin can be applied directly over a conventional satin system providing the surface is sound and thoroughly abraded prior to application. When a change of colour is required, Crown Trade Fastflow Quick Dry Primer Undercoat should be used. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding and always prime bare areas.
Application
- Please check for colour accuracy prior to application.
- Crown Paints is not liable for costs caused as a result of an incorrect colour being applied.
- Always intermix packs for colour consistency.
- Stir thoroughly before use.
- Apply liberally and evenly by synthetic brush or good quality micro fibre roller.
- Care should be taken to avoid brushing over areas that are drying.
- Two coats are recommended for best results.
- Suitable for spray application, please follow spray manufacturer's guidelines.
- Do not use in temperatures below 8°C or high humidity.