Mid Sheen Magnolia (Ready Mixed) 5L
AD01371005F
FREE next working day delivery available
Trade customer? - log in to get your prices. close
Excellent colour retention, high opacity, mid sheen finish for interior use on walls and ceilings
Share...
In detail
Crown Trade Mid Sheen is a low VOC content mid sheen finish. A washable product which is thinned with water and is applied by brush, roller or spray and is suitable for interior use.
Touch dry in 1-2 hours and recoatable after 4 hours. Soft Sheen emulsion is a decorative coating providing a low sheen finish for use on walls and ceilings.
Washable products are ideal for medium traffic areas such as lounges and bedrooms.
Can be applied to coated plaster surfaces without thinning. On new plaster, it is ideal to use a thinned first coat of matt emulsion or contract emulsion as a priming coat, prior to finishing with soft sheen emulsion.
- Size
- 5L
- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Coverage
- Up to 14sq/m per litre
- VOC level
- Low
- Thinning
- Water
- Touch dry
- 1-4 hours
- Recoatable
- 1-4 hours
- Suitable for...
- Interior use
- Scrubbability
- Washable
- Colour
- Magnolia
- Colour type
- Ready mixed
- Finish
- Silk
- Cleanup
- Water & Detergent
- Base
- Water
* Colours on screen may vary from actual paint
Data sheets
Additional information
FOR INTERIOR USE
Crown Trade's formulation ensures an attractive, wipeable mid sheen finish for interior walls and ceilings.
Preparation
Ensure all surfaces are sound, dry, clean and free from dirt, oil, grease or other contamination. Remove any loose or flaking material. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
Application
Stir thoroughly. Crown Trade Mid Sheen may be applied by brush, good quality medium pile roller or airless spray.
This product is recommended for use as supplied. However, on new plaster or highly porous surfaces, apply a mist coat of Crown Trade Mid Sheen thinned with 40% clean water. For application by airless spray, thin up to a maximum of 10% by volume with clean water. Use 0.013" to 0.015" fluid tip and pump pressure of approximately 2250lb per square inch. AVOID OVERTHINNING.
Do not apply when air or substrate temperatures are likely to fall below 8°C or when the relative humidity is above 80% during the application or drying period.
Spreading Capacity
Approximately 14m² per litre on a smooth non-absorbent surface.
Drying
Touch dry in 1-2 hours.
Recoatable after 4 hours.
Cleaning
Clean equipment with water immediately after use.
Transportation and Storage
Ensure this pack is stored upright and secure at all times. Crown Paints Ltd cannot accept liability for damage caused by spillage. Protect this pack from extreme hot and cold temperatures.
){kind=link}