Crown Trade
Steracryl Mould Inhibiting Acrylic Eggshell White 5L

AD0159005F
A high opacity anti-mould emulsion for interior walls and ceilings. Washable, stain resistant Eggshell finish.
Steracryl Mould Inhibiting Acrylic Eggshell White
Share...

In detail

Crown Trade Steracryl is a water-based high opacity mould inhibiting finish for interior walls and ceilings. It contains a fungicide to prevent mould growth. 

Ideal for use in bathrooms and wet rooms where condensation can build and mould form. 

Allow for adequate ventilation during the drying period. Do not apply when air or substrate temperatures are likely to fall below 8°C or when the relative humidity is above 80% during application or the drying period.

Size
5L 
Coverage
Up to 14sq/m per litre 
VOC level
Medium 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Suitable for...
Interior use 
Scrubbability
Washable 
Colour
White 
Finish
Eggshell 
Cleanup
Water & Detergent 
Base
Water 

Additional information

FOR INTERIOR USE
A water-based, mould inhibiting durable acrylic eggshell for use on interior walls, ceilings, and woodwork. Steracryl Mould Inhibiting Durable Acrylic Eggshell contains a special blend of fungicides that make it possible to maintain decorated surfaces in good condition in humid environments. Ideal for use in most interior areas likely to be subject to damp and condensation. Paint for professional use only to prevent mould growth on the painted surface.

Preparation
All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied. Thoroughly wash all previously painted surfaces. Existing paint finishes with a sheen should be thoroughly abraded to provide a key. If necessary, prime with Crown Trade P.S.B. (or if the surface is extremely chalky, powdery or unstable, Crown Trade Stabilising Solution should be used). Treat organic growth with Crown Trade Fungicidal Solution. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. For further information, contact our Customer Relations Team.

Application
Stir thoroughly. Crown Trade Steracryl Mould Inhibiting Durable Acrylic Eggshell may be applied by brush, good quality medium pile roller or airless spray. This product is recommended for use as supplied. However, on new plaster or highly porous surfaces, apply a mist coat of Crown Trade Steracryl Mould Inhibiting Durable Acrylic Eggshell thinned with 40% clean water. For application by airless spray, thin up to a maximum of 10% by volume with clean water. Use 0.013"-0.015" tip and fluid pump pressure of approximately 22501b (155 bar). 

AVOID OVERTHINNING.
Do not apply when air or substrate temperatures are likely to fall below 8°C or when the relative humidity is above 80% during the application or drying period.

Spreading Capacity
Up to 14m² per litre on a smooth non-absorbent surface.

Drying
Touch dry in 1-2 hours.
Recoatable after 4 hours.

Cleaning
Clean equipment with clean water immediately after use.

Transportation and Storage
Ensure this pack is stored upright and secure at all times.
Crown Paints Ltd cannot accept liability for damage caused by spillage.
Do not store below 5°C or above 40°C.