Stabilising Primer 5L
Product Code: AE01998F
Stabilising Primer 5L
Product Code: AE01998F
Seals and stabilises, ready to use, for exterior use on powdery masonry surfaces.
Trade customer? - log in to get your prices
£64.49
Inc VAT
£53.74
Exc VAT
Dulux Trade Weathershield Stabilising Primer is a high VOC content finish. This product is specially formulated to seal unstable areas which remain chalky and powdery after the surface has been prepared for Weathershield Masonry.
Dulux Trade Weathershield Stabilising Primer should be applied by brush and is suitable for exterior use. Touch dry in 8-12 hours and recoatable after 16-24 hours.
- Size
- 5L
- Barcode
- 5010212647981
- Application Methods
- Brush, Roller
- Coverage
- Up to 12sq/m per litre
- VOC level
- High
- Thinning
- Not Recommended
- Touch dry
- 12-24 hours
- Recoatable
- 12-24 hours
- Lifespan
- Up to 10 years
- Cleanup
- Brush cleaner or White spirit
- Base
- Solvent-Based
Data Sheets
-
Health and Safety Data Sheet The Health and Safety data sheet for Stabilising Primer 5L
-
Product Data Sheet The Product data sheet for Stabilising Primer 5L
Additional Information
A solvent-based primer specifically formulated to seal unstable areas which remain powdery and chalky after the surface has been thoroughly prepared for painting with Weathershield Masonry Paints.
Preparation
To get the best results, ensure surfaces to be sealed are sound, clean and dry.
Application
- Shake container vigorously before use.
- When the surface has been fully prepared any areas that remain powdery and chalky should be sealed with a coat of Weathershield Stabilising Primer.
- Brush or roller only. For health and safety reasons related to all solvent-based paints, spray application is not recommended
- When fully dry apply 2 coats of the selected Weathershield Masonry Paint.
- Weathershield Stabilising Primer should not be used as a general purpose sealer on normal or sound surfaces (i.e not powdery and chalky after the surface has been thoroughly prepared).
- New or sound bare surfaces should only be sealed with a thinned first coat of the masonry paint itself.
- For health and safety reasons related to all solvent-based paints, spray application is not recommended