Johnstones Trade
Acrylic Durable Matt Brilliant White 5L

AF027005F
Store stocked line
FREE next working day delivery available
£42.13 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Trade Deals promotion
Quick drying, high opacity, matt finish for use on interior walls & ceilings. Suitable for high traffic areas and can be wiped clean.
Acrylic Durable Matt Brilliant White
  • Acrylic Durable Matt Brilliant White
  • Acrylic Durable Matt Brilliant White
Share...

In detail

Johnstone's Trade Acrylic Durable Matt is a Eco VOC content matt finish. A scrubbable product which is thinned with water and is applied by brush, roller, airless spray or HVLP spray. 

  • Suitable for interior use. 
  • Touch dry in 1-2 hours and recoatable after 4 hours.
Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings. 

Wipeable products are suitable for light traffic areas where occasional cleaning is required. 

Can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.

Size
5L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 13sq/m per litre 
VOC level
Eco 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Suitable for...
Interior use 
Scrubbability
Scrubbable 
Colour
Brilliant White 
Colour type
White 
Finish
Matt 
Cleanup
Water & Detergent 
Base
Water 

* Colours on screen may vary from actual paint

Additional information

Surface Preparation

All surfaces to be painted should be clean, dry and free from grease. Remove any crazed or flaking paint.

Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly before applying a pre-coat of Johnstones Joncryl Water Based Primer Undercoat. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

Special precautions should be taken during surface preparation of pre 1960s paint surfaces over wood and metal as they may contain harmful lead.

Seal absorbent surfaces with a solution of up to 1 part water to 4 parts Acrylic Matt. Prime bare timber and metal surfaces with an appropriate Johnstones primer.

Allow radiators to cool before painting.

Application

  • Stir thoroughly before use.
  • Apply by brush, roller or paint pad.
  • When using a roller, use a medium pile synthetic type. Do not overfill the tray. Ensure the roller is loaded evenly.
  • If using a brush, load generously. Apply liberally and evenly; avoid overspreading.
  • If more than one can of a colour is to be used in the same area, intermix before use.
  • Do not apply in temperatures below 10°C.

Clearing Up

Remove as much product as possible from application equipment before cleaning. Replace lid firmly.

Clean equipment immediately after with warm soapy water and rinse thoroughly.

Do not empty into drains and watercourses.

Related products

Back