Johnstones Trade
Aqua Undercoat Colour (Tinted) S0530R 5L

AF032705F
NCS: S0530R
Quick drying, low odour, matt finish for interior and exterior use on wood and metals.
Aqua Undercoat Colour (Tinted)
Share...

In detail

Johnstone's Trade Aqua Undercoat is a low VOC content finish. Thinned with water and applied by brush.  

Suitable for interior and exterior use.  Touch dry in 1-2 hours and recoatable after 4-6 hours.

Quick drying so ideal for under water and solvent based trim finishes. Maintains gloss levels of Aqua Water Based Gloss Topcoat. Low odour.

Size
5L 
Application Methods
Brush
Coverage
Up to 12sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
4-8 hours 
Suitable for...
Interior and exterior use 
Colour type
Tinted 
Cleanup
Water & Detergent 
Base
Water 

* Colours on screen may vary from actual paint

Available colours

Johnstones Trade Aqua Undercoat Colour (Tinted) is available in 1939 colours from the Johnstones Trade Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    All surfaces to be painted should be clean, dry and free from loose and flaking material. Prime bare wood surfaces with Johnstones Aqua Undercoat. Prime all other bare surfaces with the appropriate primer.

    Rub down previously painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

    Special precautions should be taken during surface preparation of pre 1960s paint surfaces over wood and metal as they main contain harmful lead.

    Application

    • Stir well before use.
    • Easy to apply by brush.
    • Avoid overspreading.
    • Do not apply in temperatures below 10°C or externally when rain is imminent.
    • For best results use a good quality synthetic brush.

    Clearing Up

    Remove as much product as possible from application equipment before cleaning. Replace lid firmly.

    Clean equipment immediately after use with warm soapy water and rinse thoroughly.

    Do not empty product into drains or watercourses.