Johnstones Trade
Vinyl Silk Brilliant White 10L

AF045005E
£74.99 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Durable, silk finish for interior use on walls and ceilings. Washable.
Vinyl Silk Brilliant White
Share...

In detail

Johnstone's Trade Vinyl Silk is a low VOC content silk finish. A washable product which is thinned with water and is applied by brush, roller or spray. 

  • Suitable for interior use. 
  • Touch dry in 1-2 hours and recoatable after 3-4 hours. 
Silk emulsion is a decorative coating providing a mid sheen finish for use on walls and ceilings.

Washable products are ideal for medium traffic areas such as lounges and bedrooms.

Can be applied to coated plaster surfaces without thinning. On new plaster, it is ideal to use a thinned first coat of matt emulsion or contract emulsion as a priming coat, prior to finishing with silk emulsion.

Size
10L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 12sq/m per litre 
VOC level
Eco 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Suitable for...
Interior use 
Scrubbability
Washable 
Colour
Brilliant White 
Colour type
White 
Finish
Silk 
Cleanup
Water & Detergent 
Base
Water 

* Colours on screen may vary from actual paint

Additional information

Surface Preparation

All surfaces to be painted should be clean, dry and free from loose and flaking material.

Prime bare surfaces with the appropriate Johnstones Primer.

Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse.

Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

Special precautions should be taken during surface preparation of pre 1960s paint surfaces over wood and metal as they may contain harmful lead.

Application

  • Stir thoroughly before use.
  • Apply by brush or roller.
  • Also suitable for application by spray.
  • Seal absorbent surfaces with a coat of Vinyl Silk thinned up to 10% with clean water.
  • When using a roller, use a medium pile synthetic type. Do not overfill the tray. Ensure the roller is loaded evenly.
  • If more than one can of a colour is to be used in the same area, intermix before use.
  • Do not apply in temperatures below 10°C.

Clearing Up

Remove as much product as possible from application equipment before cleaning. Replace lid firmly.

Clean equipment immediately after with warm soapy water and rinse thoroughly.

Do not empty into drains and watercourses.