Steel & Cladding Semi Gloss Topcoat Colour (Tinted) 5L
In detail
Johnstone's Trade Steel & Cladding Semi Gloss Topcoat is a high VOC content mid sheen finish. A washable product which is thinned with TC2 Thinner and Cleaner and is applied by brush or roller.
- Size
- 5L
- Application Methods
- Brush, Roller
- Coverage
- Up to 10sq/m per litre
- VOC level
- High
- Thinning
- TC2 Thinner and Cleaner
- Recoatable
- 12-24 hours
- Suitable for...
- Exterior use
- Scrubbability
- Washable
- Colour type
- Tinted
- Finish
- Satin
- Cleanup
- TC2 Thinner and Cleaner
- Base
- Oil
* Colours on screen may vary from actual paint
Available colours
Johnstones Trade Steel & Cladding Semi Gloss Topcoat Colour (Tinted) is available in 4450 colours from the Johnstones Trade Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers.
Data sheets
Product Data Sheet
The Product data sheet for Steel & Cladding Semi Gloss Topcoat Colour (Tinted) 5LAdditional information
Surface Preparation
Cladding: Clean thoroughly with Johnstones Cleaner and Degreaser after removing all loose and flaking paint, salts etc.
Wash down with clean water. All bare areas of steel/aluminium must be suitable prepared and spot primed with Johnstones Quick Zinc Phosphate Primer.
Steel: Prepare surface and prime accordingly. If over coating an existing paint ensure the surface is clean and dry.
Special precautions should be taken during surface preparation of pre 1960s paint surfaces over wood and metal as they may contain harmful lead.
Application
- Stir thoroughly before use.
- Easy to apply by brush or roller.
- If more than one can of a colour is to be used in the same area, intermix before use.
Clearing Up
Remove as much product as possible from application equipment before cleaning. Replace lid firmly.
Clean equipment immediately after with TC2 Thinner and Cleaner.
Do not empty into drains and watercourses.
){kind=link}