Armstead Trade
Contract Matt Magnolia (Ready Mixed) 10L

AG3310E
Store stocked line
£17.99 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Trade Deals promotion
Quick drying, high opacity, matt finish, suitable for interior use. Ideal for new plaster.
Contract Matt Magnolia (Ready Mixed)
Share...

In detail

Armstead Trade Contract Matt is a quick drying, high opacity, matt finish that is non-wipeable and is thinned with water and can be applied by brush, roller, airless spray or HVLP spray. Suitable for interior use and touch dry in 1-2 hours and recoatable after 2-4 hours. It is 99.9% VOC free, to minimise the impact of indoor air quality.  


Contract Matt is a decorative coating for use on new plaster surfaces. Provides a water permeable finish which allows the substrate to dry. Non-wipeable products are not suitable for wiping, washing or scrubbing.  

Can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.

Size
10L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 15sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Colour
Magnolia 
Colour type
Ready mixed 
Finish
Matt 
Cleanup
Water & Detergent 
Base
Water-Based 

* Colours on screen may vary from actual paint

Available colours

Armstead Trade Contract Matt Magnolia (Ready Mixed) is available in 1 colours from the Armstead Trade Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    Surfaces must be clean, dry, and free from all defective or poorly adhering materials, dirt, grease and salts.

    New plaster and masonry must be fully dry before priming.

    Application

    Apply by brush, roller, spray and airless spray.

    As with other water-based paints, do not apply in temperatures below 8ºC.

    Clearing Up

    After use, remove as much paint as possible from equipment before cleaning with clean water.