Smooth Masonry (Tinted) 5L - Cummulus
Product Code: AG4210F
Smooth Masonry (Tinted) 5L - Cummulus
Product Code: AG4210F
Professional quality, excellent coverage and application, smooth matt finish for exterior use.
* Colours on screen may vary from actual paint
Trade customer? - log in to get your prices
£52.49
Inc VAT
£43.74
Exc VAT
Armstead Trade Smooth Masonry is a low VOC content matt finish. A washable product which is thinned with water and is applied by brush, roller, airless spray or HVLP Spray. Suitable for exterior use and touch dry in 1-2 hours and recoatable after 2-4 hours.
A professional quality, smooth exterior emulsion paint. It has an attractive high build finish and provides excellent coverage and application.
What is a tinted product?
This means the chosen colour and paint finish has been mixed to order, especially for you.
- Size
- 5L
- Barcode
- 5010212592472
- Application Methods
- Airless Spray, Brush, Roller
- Coverage
- Up to 12sq/m per litre
- VOC level
- Low
- Thinning
- Water
- Touch dry
- 1-4 hours
- Recoatable
- 1-4 hours
- Scrubbability
- Washable
- Lifespan
- Up to 15 years
- Colour type
- Tinted
- Finish
- Matt
- Cleanup
- Water & Detergent
- Base
- Water-Based
Data Sheets
-
Health and Safety Data Sheet The Health and Safety data sheet for Smooth Masonry (Tinted) 5L
-
Product Data Sheet The Product data sheet for Smooth Masonry (Tinted) 5L
Additional Information
Surface Preparation
To get the best results with Armstead Trade Smooth Masonry, make sure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry).
Application Method
Brush, roller or spray.
STIR THOROUGHLY BEFORE USE. On very absorbent surfaces a sealing coat of thinned Armstead Trade Smooth Masonry (up to 1 part clean water to 5 parts paint) should be applied. The normal finishing process is 1 or 2 full coats of Armstead Trade Smooth Masonry. Drying time will vary according to temperature and humidity e.g. the drying times quoted will be significantly longer in cold, damp conditions. Coverage up to 12m²/I depending on surface texture. These figures are only an approximate guide and may be reduced. If in doubt, apply a small trial area.
Cleaning Up
After use, remove as much paint as possible from equipment before cleaning with water. Do not use or store in extremes of temperature. When this paint container is empty please ask your stockist about recycling.