Armstead Trade Pliolite Masonry is a high VOC content matt finish. Applied by brush or roller, suitable for exterior use and touch dry in 1-1. 5 hours and recoatable after 12 hours.
A professional quality, durable solvent- based smooth masonry paint. Based on Pliolite Acrylated Rubber resins, it provides a long lasting coating with good adhesion and resistance to moisture and alkali attack.
Easy to apply and provides good coverage. Armstead Trade Pliolite Based Masonry Paint is much more tolerant to showery or cold weather during application than traditional water- based exterior masonry paints and can be applied to exterior masonry surfaces at virtually any time of the year.
Up to 8sq/m per litre
Up to 15 years
Brush cleaner or White spirit
* Colours on screen may vary from actual paint
Armstead Trade Pliolite Masonry (Tinted) is available in 128 colours from the Armstead Trade Colour Cards.
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
To get the best results with Armstead Trade Pliolite® Based Masonry, make sure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry).
Brush, roller or spray.
STIR THOROUGHLY BEFORE USE. The normal finishing process is 1 or 2 coats of Armstead Trade Pliolite® Based Masonry. Touch dry 1-1.5 hours at 20°C/65%RH. Drying time will vary according to temperature and humidity e.g. the drying times quoted will be significantly longer in cold, damp conditions. Coverage up to 8m²/l depending on surface texture. These figures are only an approximate guide and may be reduced. If in doubt, apply a small trial area first.
After use, remove as much paint as possible from equipment before cleaning with brush cleaner. Do not use or store in extremes of temperature. When this paint container is empty please ask your stockist about recycling.