Little Greene
Traditional Oil Gloss (Tinted) Bone China Blue Faint 325 1L

FREE next working day delivery available
£43.00 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

A durable, high-sheen finish for interior and exterior wood and metal surfaces.
Traditional Oil Gloss (Tinted)

In detail

Little Greene Traditional Oil Gloss is a durable, high-sheen finish for use on interior and exterior wood and metal surfaces. Extremely hard-wearing and provides a completely washable surface. The high-sheen finish has excellent light reflection.

Environmentally friendly - it uses an eco-oil recipe which has been formulated using naturally occurring vegetable oils. Application is by brush, roller or spray with coverage up to 16sq/m per litre. Touch dry in 4 hours and recoatable after 16 hours.

Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Up to 16sq/m per litre 
VOC level
Not recommended 
Touch dry
1-4 hours 
12-24 hours 
Suitable for...
Interior and exterior use 
Colour type
Brush cleaner or White spirit 

* Colours on screen may vary from actual paint

Available colours

Little Greene Traditional Oil Gloss (Tinted) is available in 203 colours from the Little Greene Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at

    Additional information

    A flexible, hard wearing, washable and water resistant oil based full gloss finish designed for both exterior and interior application to suitably prepared surfaces.

    Directions of use:

    • Stir thoroughly before use. Do not apply to surfaces when the ambient temperature is below 5°C.
    • Application by brush, roller or spray.
    • Lightly rubbing down between coats will remove any dust motes and other surface contamination, producing a near professional finish.

    Surface Preparation:

    New wood - For soft woods, knots should be sealed with knotting compound to prevent staining and then primed with Little Greene Traditional Oil Primer Undercoat. Resinous hard woods require cleaning and treatment with Little Greene Aluminium Wood Primer (consult the relevant product data sheets for further details) prior to undercoating.

    Metals - New ferrous metalwork should be hand, or mechanically cleaned, to remove any surface rust before application of Little Greene Traditional Oil Primer Undercoat. Non ferrous metals must be pre-treated or primed with an appropriate proprietary primer.

    Existing paint finish - Remove all loose and flaking paintwork. Degrease with a suitable detergent solution, such as sugar soap, followed by clean water rinse. Rub down thoroughly with a medium grade sand paper to provide a key and a defect free smooth surface, “feathering in” areas where paint has been removed. Make good any repairs, sand and apply primer to exposed surface as appropriate

    Plastics - For long term performance, clean & lightly sand down surfaces, using a proprietary adhesion promoting plastics primer before applying the finishing coat. When item is to be fully encapsulated in the paint (such as external down pipes) then a light rub down is more than adequate