Store locator
Favourites
Account
Flat Emulsion Sample (Ready Mixed) 125ML - Plaster III 403
Product Code: AV1711513T
Share
-
Email
-
Facebook
-
Pinterest
-
Flat Emulsion Sample (Ready Mixed) 125ML - Plaster III 403
){kind=icon}
Microporous, high opacity, matt finish for interior use. Suitable for most interior plaster walls, cornices and ceilings. Wipeable.
* Colours on screen may vary from actual paint
Trade customer? - log in to get your prices
£6.00
Inc VAT
£5.00
Exc VAT
Quantity
Check store stock
Delivery
Estimated delivery:
Free next day delivery
Free next day delivery
£6.00
Inc VAT
£5.00
Exc VAT
Paint Library Pure Flat Emulsion is a water-based, matt finish for interior plaster walls and ceilings. It has excellent coverage and dries to a wipeable, dead flat, chalky finish that is microporous, allowing the surface to breathe.
Quick drying, low-odour and environmentally friendly with minimal VOC content. Application is by brush, roller or spray with coverage up to 14sq/m per litre.Touch dry in 2 hours and recoatable in 4 hours.
- Size
- 125ML
- Barcode
- 5050173022731
- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Coverage
- Up to 14sq/m per litre
- VOC level
- Low
- Thinning
- Water
- Touch dry
- 1-4 hours
- Recoatable
- 1-4 hours
- Scrubbability
- Washable
- Colour
- Plaster III
- Colour type
- Ready mixed
- Finish
- Matt
- Cleanup
- Water & Detergent
Data Sheets
-
Health and Safety Data Sheet The Health and Safety data sheet for Flat Emulsion Sample (Ready Mixed) 125ML -
Product Data Sheet The Product data sheet for Flat Emulsion Sample (Ready Mixed) 125ML
Additional Information
Surface Preparation
All internal surfaces must be free from contamination, dust and efflorescence and be properly prepared. Fungicidal solution should be used where necessary. Not suitable for Heated Surfaces.
Extremely porous substrates may require a coat of stabilising solution to bind substrate.
Application
- Thinning should only take place after the material has been thoroughly mixed.
- Thin if required with 0-5% water.
Clean Up
Equipment should be cleaned immediately after use with water.
