Vinyl Matt Brilliant White 10L
AV20045E
Trade customer? - log in to get your prices. close
Macpherson Vinyl Matt is tough and practical has high opacity and a flat matt finish for interior use on walls & ceilings. Wipeable
Share...
In detail
Macpherson Vinyl Matt is a low VOC content matt finish which is suitable for use on interior use.
It dries to a wipeable matt finish which is ideal for use in light traffic areas where occasional cleaning is required. It can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations. For chalky or dusty surfaces, apply over a suitable plaster sealer.
Application of Macpherson Vinyl Matt is recommended by brush, roller or airless spray with coverage up to 16sq/m per litre. Touch dry in 2 hours and recoatable in 4 hours. 2 coats are recommended.
- Size
- 10L
- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Coverage
- Up to 16sq/m per litre
- VOC level
- Low
- Thinning
- Water
- Touch dry
- 1-4 hours
- Recoatable
- 1-4 hours
- Suitable for...
- Interior use
- Scrubbability
- Wipeable
- Colour
- Brilliant White
- Colour type
- White
- Finish
- Matt
- Cleanup
- Water & Detergent
- Base
- Water
* Colours on screen may vary from actual paint
Available colours
Macpherson Vinyl Matt Brilliant White is available in 1 colours from the Macpherson Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Data sheets
Additional information
FOR INTERIOR USE
An attractive matt finish based on a modern copolymer resin that provides good interior durability.
Suitable for the decoration of most interior wall and ceiling surfaces.
Preparation and Application
- Ensure that all surfaces are sound, dry, clean and free from dirt, oil, grease or other contamination.
- Avoid the inhalation of dust.
- Wear a suitable face mask if dry sanding.
- Supplied ready for use by brush, roller or conventional or airless spray.
- For airless spray application thin up to 20% water. On very absorbent surfaces or new plaster dilute 40% by volume with clean water for first coat only.
- Covers up to 15-16m² per litre depending on surface texture and porosity.
- Touch dry in 2 hours, recoatable after 4 hours under normal drying conditions.
- Clean equipment with water immediately after use.
- Do not use in temperatures below 8°C or in high humidity.
- For further information contact the manufacturer.
Transportation and Storage
Ensure this pack is stored upright and secure at all times. Crown Paints Limited cannot accept liability for damage caused by spillage. Do not store below 5°C or above 40°C.