Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Vinyl Matt Magnolia 10L

Product Code: AV20050E
Loading ... Expand image

Vinyl Matt Magnolia 10L

Product Code: AV20050E
Trustpilot

Tough and practical, high opacity, flat matt finish for interior use on walls & ceilings. Wipeable

£58.99 Inc VAT £49.16 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
3 working days
£58.99 Inc VAT £49.16 Exc VAT
Macpherson Vinyl Matt is a low VOC content matt finish. It is a wipeable product which is thinned with water and is applied by brush, roller, airless spray or HVLP spray. It is suitable for interior use. It is touch dry in 2-3 hours and recoatable after 4 hours. Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings. Wipeable products are suitable for light traffic areas where occasional cleaning is required. It can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.
Size
10L
Barcode
5010584062993
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 16sq/m per litre
VOC level
Low
Thinning
Water
Touch dry
1-4 hours
Recoatable
1-4 hours
Suitable for...
Interior use
Scrubbability
Wipeable
Colour
Magnolia
Colour type
Ready mixed
Finish
Matt
Cleanup
Water & Detergent
Base
Water
Trustpilot

Data Sheets

Additional Information

FOR INTERIOR USE
An attractive matt finish based on a modern copolymer resin that provides good interior durability.
Suitable for the decoration of most interior wall and ceiling surfaces.

Preparation and Application
  • Ensure that all surfaces are sound, dry, clean and free from dirt, oil, grease or other contamination.
  • Avoid the inhalation of dust.
  • Wear a suitable face mask if dry sanding.
  • Supplied ready for use by brush, roller or conventional or airless spray.
  • For airless spray application thin up to 20% water. On very absorbent surfaces or new plaster dilute 40% by volume with clean water for first coat only.
  • Covers up to 15-16m² per litre depending on surface texture and porosity.
  • Touch dry in 2 hours, recoatable after 4 hours under normal drying conditions.
  • Clean equipment with water immediately after use.
  • Do not use in temperatures below 8°C or in high humidity.
  • For further information contact the manufacturer.

Transportation and Storage
Ensure this pack is stored upright and secure at all times. Crown Paints Limited cannot accept liability for damage caused by spillage. Do not store below 5°C or above 40°C.