Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Eclipse Brilliant White 15L

Product Code: AV20075B
Loading ... Expand image

Eclipse Brilliant White 15L

Product Code: AV20075B
Trustpilot

Macpherson Eclipse has very high opacity and a matt finish for interior use. Can be applied to new plaster and render before the drying process is complete.

£56.48 Inc VAT £47.07 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
3 working days
£56.48 Inc VAT £47.07 Exc VAT
Macpherson Eclipse is a low VOC content matt finish. It is a product which is thinned with water and is applied by brush, roller, airless spray or HVLP spray. Macpherson Eclipse is suitable for interior use. It is touch dry in 2 hours and recoatable after 4 hours. Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings. It can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.
Size
15L
Barcode
5010584122871
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 16sq/m per litre
VOC level
Low
Thinning
Water
Touch dry
1-4 hours
Recoatable
1-4 hours
Suitable for...
Interior use
Colour
Brilliant White
Colour type
White
Finish
Matt
Cleanup
Water & Detergent
Base
Water
Trustpilot

Data Sheets

Additional Information

FOR INTERIOR USE
An economical water-based matt finish for interior use. High moisture permeability permits application to new plaster, render etc before the drying process is complete. Suitable for the decoration of most interior surfaces.

Preparation and Application
  • Ensure all surfaces are sound, dry, clean and free from dirt, oil, grease or other contamination.
  • Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
  • Supplied ready for use by brush, roller & conventional or airless spray.
  • For new plaster or highly porous surfaces dilute 40% by volume with clean water for first or primer coat only.
  • Do not use if temperatures are likely to fall below 8°C during the application and drying periods.
  • Covers approximately 14-16m² per litre depending upon surface texture and porosity.
  • Touch dry in 2 hours, recoatable after 4 hours under normal drying conditions.
  • Clean equipment with water immediately after use.
  • For further information contact the manufacturer.

Transportation and Storage
Ensure this pack is stored upright and secure at all times. Crown Paints Limited cannot accept liability for damage caused by spillage. Do not store below 5°C or above 40°C.