Leyland Trade
Contract Matt Magnolia (Ready Mixed) 15L

£55.43 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Good coverage, matt finish for interior use on walls & ceilings. Ideal for new work application.
Contract Matt Magnolia (Ready Mixed)

In detail

Leyland Trade Contract Matt is a low VOC content matt finish. Thinned with water and applied by brush, roller, airless spray or HVLP spray. 

  • Suitable for interior use. 
  • Touch dry in 1-2 hours and recoatable after 3-4 hours. 
Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings. Can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.

Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Up to 13sq/m per litre 
VOC level
Touch dry
1-4 hours 
1-4 hours 
Colour type
Ready mixed 
Water & Detergent 

* Colours on screen may vary from actual paint

Additional information

Surface Preparation

All surfaces to be painted should be clean, dry and free from loose and flaking material. Primer where required with Leyland Contract Primer Undercoat. Rub down glossy surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Seal absorbent surfaces with a solution of up to 1 part water to 9 parts Leyland Contract Matt.


  • Stir well before use.
  • Do not thin, except for absorbent surfaces, or when applying by roller or spray when a small quantity of clean water may be added.
  • Suitable for application by brush, roller or spray.
  • Apply paint evenly and avoid overspreading.
  • If required, a second coat may be applied after 2 to 4 hours.
  • Do not apply in temperatures below 10ºC.

Clean Up

Remove as much product as possible from the application equipment before washing. Replace lid firmly. Wash equipment immediately after use with warm soapy water.

Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses.