Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

Contract Matt Magnolia (Ready Mixed) 10L

Product Code: AV308510E
Loading ... Expand image

Contract Matt Magnolia (Ready Mixed) 10L

Product Code: AV308510E
Trustpilot

Good coverage, matt finish for interior use on walls & ceilings. Ideal for new work application.

£24.49 Inc VAT £20.41 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
3 working days
£24.49 Inc VAT £20.41 Exc VAT

Leyland Trade Contract Matt is a low VOC content matt finish. Thinned with water and applied by brush, roller, airless spray or HVLP spray. 

  • Suitable for interior use. 
  • Touch dry in 1-2 hours and recoatable after 3-4 hours. 
Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings. Can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.
Size
10L
Barcode
5010426679044
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 13sq/m per litre
VOC level
Low
Thinning
Water
Touch dry
1-4 hours
Recoatable
1-4 hours
Suitable for...
Interior use
Colour
Magnolia
Colour type
Ready mixed
Finish
Matt
Cleanup
Water & Detergent
Base
Water
Trustpilot

Data Sheets

Additional Information

Surface Preparation

All surfaces to be painted should be clean, dry and free from loose and flaking material. Primer where required with Leyland Contract Primer Undercoat. Rub down glossy surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Seal absorbent surfaces with a solution of up to 1 part water to 9 parts Leyland Contract Matt.

Application

  • Stir well before use.
  • Do not thin, except for absorbent surfaces, or when applying by roller or spray when a small quantity of clean water may be added.
  • Suitable for application by brush, roller or spray.
  • Apply paint evenly and avoid overspreading.
  • If required, a second coat may be applied after 2 to 4 hours.
  • Do not apply in temperatures below 10ºC.

Clean Up

Remove as much product as possible from the application equipment before washing. Replace lid firmly. Wash equipment immediately after use with warm soapy water.

Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses.

Related Products