Leyland Trade
Contract Silk Magnolia (Ready Mixed) 10L

AV309010E
High opacity, good coverage, silk finish for interior walls and ceilings. Ideal for contract work.
Contract Silk Magnolia (Ready Mixed)
Share...

In detail

Leyland Trade Contract Silk is a low VOC content silk finish. Silk emulsion is a decorative coating providing a mid sheen finish for use on walls and ceilings.

On new plaster, it is ideal to use a thinned first coat of matt emulsion or contract emulsion as a priming coat, prior to finishing with silk emulsion. Touch dry in 1-2 hours and recoatable after 3-4 hours. 

Can be applied to coated plaster surfaces without thinning. On new plaster, it is ideal to use a thinned first coat of matt emulsion or contract emulsion as a priming coat, prior to finishing with silk emulsion.

Size
10L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 12sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Suitable for...
Interior use 
Colour
Magnolia 
Colour type
Ready mixed 
Finish
Silk 
Cleanup
Water & Detergent 
Base
Water 

* Colours on screen may vary from actual paint

Additional information

Surface Preparation

All surfaces to be painted should be clean, dry and free from loose and flaking material. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Seal absorbent surfaces with a solution of up to 1 part water to 9 parts Leyland Contract Silk.

Application

  • Stir well before use.
  • Do not thin, except for absorbent surfaces, or when applying by roller or spray when a small quantity of clean water may be added.
  • Suitable for application by brush, roller or spray.
  • Apply paint evenly and avoid overspreading.
  • If required, a second coat may be applied after 3 to 4 hours.
  • Do not apply in temperatures below 10ºC.

Clean Up

Remove as much product from the application equipment before washing. Replace lid firmly. Wash equipment immediately after use with warm soapy water.

Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses.