Store locator
Favourites
Account
Asbestos Encapsulating Coat (Tinted) 50 SQM - 04E51
Share
-
Email
-
Facebook
-
Asbestos Encapsulating Coat (Tinted) 50 SQM - 04E51
){kind=icon}
Encapsulates asbestos to prevent fibre release and ensure long-term safety.
* Colours on screen may vary from actual paint
5 working days
Thermoguard Asbestos Encapsulating Coat seals and encapsulates rigid, sound asbestos in concealed or hard-to-access areas not subject to mechanical damage. Also suitable for sealing isolated fibres left after primary asbestos removal, permanently bonding them to the surface to prevent fibre release into the atmosphere.
Suitable for internal wall panels, top and underside of ceiling panels, internal ducts or pipework and external wall sheets, fascia or soffits.
surfaces. UKAS accredited Asbestos Test Centre assessment of air-borne asbestos fibre level “Below the limit of Detection” results from extended period severe vibration test.
IMPORTANT NOTICE: The information displayed on this website should be used as a guide ONLY. Please contact our Fire Protection Specialist on 01323 576101 to obtain a tailored specification and any advice necessary prior to placing an order. Tailored specifications must be obtained when requiring greater fire protection than surface spread of flame BS EN Class B & Class O. Failure to adhere to tailored specification will likely result in product failure. We always recommend a trial area is coated to ensure the product meets your requirements before use.
This means the chosen colour and paint finish has been mixed to order, especially for you.
- Size
- 50 SQM
- Barcode
- 5021887062290
- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Thinning
- Water
- Suitable for...
- Interior use
- Colour type
- Tinted
- Base
- Water-Based
