Coo-Var
Suregrip Antislip Floor Paint (Ready Mixed) 5L

BE07060010F
Ready-mixed aggregated floor paint, rough anti-slip finish for interior and exterior use on foot and light traffic areas.
Suregrip Antislip Floor Paint (Ready Mixed)
Share...

In detail

Coo-Var Suregrip Antislip Floor Paint is a high VOC content mid sheen finish. A washable product which should not be thinned and is applied by brush or roller.

Suitable for interior and exterior use. Touch dry in 5 hours and recoatable after 16-24 hours.

Size
5L 
Application Methods
Brush, Roller
Coverage
Up to 10sq/m per litre 
VOC level
High 
Thinning
Do not thin 
Touch dry
4-8 hours 
Recoatable
12-24 hours 
Scrubbability
Washable 
Colour
Light Grey 
Finish
Satin 
Cleanup
Coo-Var Thinners 14 
Base
Oil 

* Colours on screen may vary from actual paint

Available colours

Coo-Var Suregrip Antislip Floor Paint (Ready Mixed) is available in 6 colours from the Coo-Var Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Suregrip®
    Coo-Var Suregrip is a ready mixed anti-slip floor coating. By containing a professionally dispersed combination of resins bonded to aggregates, the resultant surface is not only a true anti-slip abrasive finish but it also provides a good degree of durability, decoration and protection.
    Suregrip is ideal for use in critical areas such as doorways, steps, stairways, ramps, around machinery and any location where moisture or other substances may make floors slippery. Can be applied to concrete, GRP, and suitably prepared wood and metal. Designed for foot and light truck traffic.

    Preparation
    Stir only if necessary (do not use a mechanical shaker). Surface should be clean, dry and free from wax and grease. New concrete should be dry (2-3 months after laying). Smooth concrete surfaces should be etched. Remove salts from new concrete (Acid Etch). On the clean, prepared concrete apply a coat of Coo-Var Floor Paint (not Suregrip) of the appropriate colour which has been thinned 10% with Thinners 14 (do not thin Suregrip). This will act as a primer sealer. Metal should be suitably primed. On GRP use an appropriate primer or abrade the surface to provide a good 'key'. On wooden surfaces, apply a suitable oil based wood primer if new/untreated or for previously painted surfaces, sand down then remove any loose or flaking material and dust down before spot priming any bare areas.

    Application
    By brush or roller. A single coat may be adequate. A second coat can be advantageous. Avoid applying too thickly - this will result in slow drying and impaired performance.

    Drying Time 
    Touch Dry: 5 hours. Hard Dry: 24 hours.
    Overcoat Time: 16 hours or overnight
    Coverage Guide: 6-10 square metres per litre
    Brushwash: Thinners 14