Direct to Rust Metal Paint Satin Black (Ready Mixed) 750ML
BG151105P
FREE next working day delivery available
Trade customer? - log in to get your prices. close
Fast drying, metal protecting, satin finish for exterior use on rusty surfaces.
Share...
In detail
Hammerite Direct to Rust Metal Paint Satin is a high VOC content satin finish.
A washable product which should not be thinned. Suitable for exterior use. Touch dry in 1-2 hours and recoatable after 4 hours.
- Size
- 750ML
- Application Methods
- Brush, Roller
- Coverage
- Up to 5sq/m per litre
- VOC level
- High
- Thinning
- Do not thin
- Touch dry
- 1-4 hours
- Recoatable
- 1-4 hours
- Scrubbability
- Washable
- Colour
- Black
- Finish
- Satin
- Cleanup
- Hammerite Brush Cleaner & Thinners
- Base
- Oil
* Colours on screen may vary from actual paint
Available colours
Hammerite Direct to Rust Metal Paint Satin Black (Ready Mixed) is available in 1 colours from the Hammerite Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Additional information
Hammerite Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one.
Surface Preparation
- Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush.
- Remove dirt, dust, and grease with diluted detergent. Rinse with clean water and allow time to dry.
- Paint a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface.
- If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint.
- On bare zinc, aluminium and galvanised surfaces; apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint.
Application
- Ideal application temperature = 8°C to 25°C.
- Lightly stir before use. Do not mix vigorously.
Brush Application
- Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient.
- On bare/rusty metal, 2 coats are required.
- Ensure that all edges and corners are adequately covered.
- Do not over-apply, as sagging will occur. Step 3 - Cleaning and Storage
- After use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners.
- Do not use or store in extremes of temperature.
Coverage
5m²/L
Touch Dry
1 - 2 Hours
Re-Coat
4 Hours