Direct to Rust Metal Paint Satin Black (Ready Mixed) 400ML
BG151105QA
Trade customer? - log in to get your prices. close
Sorry - this product cannot be delivered
Easy to use, fast drying, satin finish for long lasting protection.
Share...
In detail
Direct to Rust Metal Paint Satin is a high VOC content satin finish.
A washable product which should not be thinned. Suitable for exterior use. Touch dry in 1-2 hours and recoatable after 4 hours.
- Size
- 400ML
- Application Methods
- Aerosol
- Coverage
- Up to 5sq/m per litre
- VOC level
- High
- Scrubbability
- Washable
- Colour
- Black
- Finish
- Satin
- Base
- Oil
- Age restriction
- You must be 16 years or older to buy this product.
* Colours on screen may vary from actual paint
Available colours
Hammerite Direct to Rust Metal Paint Satin Black (Ready Mixed) is available in 1 colours from the Hammerite Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Additional information
Hammerite Direct To Rust Metal Paint Satin is specially formulated to perform as primer, undercoat and topcoat in one.
Surface Preparation
- Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush.
- Remove dirt and dust with diluted detergent.
- Remove grease with Hammerite Brush Cleaner & Thinners. Then rinse with clean water and allow to dry.
- Spray a test patch of Hammerite Direct to Rust Metal Paint Satin onto the painted surface and leave to dry for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint Satin directly to the surface. If there is a reaction, remove all paint from the surface.
- On bare zinc, aluminium and galvanised surfaces; apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint Satin.
Application
- Store aerosol at room temperature for two hours prior to use.
- Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes.
- Apply light even coats, from a distance of approximately 15cm (6"), and keep the aerosol moving.
- Do not concentrate spray on one spot.
- Apply at least 3-4 coats for maximum protection.
- Allow 15 minutes between coats.
- Between coats invert can and spray for 2 seconds to avoid blockages.
- Please note that this product is Not suitable for use on toys.
Storage
- Store in a dry well ventilated area and protect from frost and strong sunlight.