No.1 Rust Beater Dark Brown (Ready Mixed) 2.5L
BG152040J
FREE next working day delivery available
Trade customer? - log in to get your prices. close
Corrosion resistant, high build finish. Can be applied direct to rust.
Share...
In detail
Provides a high build finish to heavy areas of rust and also prevents new rust forming.
Corrosion resistant and can be applied direct to rust. An anti-corrosive primer for ferrous metals. Compatible with most topcoats.
- Size
- 2.5L
- Application Methods
- Brush
- Colour
- Dark Brown
* Colours on screen may vary from actual paint
Additional information
Surface Preparation
- For maximum adhesion remove all loose rust and paint with a wire brush.
- Remove grease with Hammerite Brush Cleaner and Thinners and allow to dry.
- Remove dirt and salt deposits with dilute detergent, rinse with fresh water and allow to dry.
- Abrade clean steel with abrasive paper to provide a key.
Application
- Ideal application temperature = 8°C to 25°C.
Brush Application:
- Stir primer thoroughly before use.
- Apply two coats, allowing at least 6 hours between coats.
Finishing:
- A suitable Hammerite topcoat/paint system must be applied after a minimum of 6 hours. For best results allow 24 hours.
Cleaning and Storage
- Remove as much primer as possible from equipment before cleaning. For best results use Hammerite Brush Cleaner & Thinners.
- Hammerite No.1 Rust Beater should be stored in a dry well-ventilated area.
- Protect from frost and direct sunlight.
){kind=link}