Free next-day delivery Delivery van. 01323 576555 Telephone.
Store pin. Store locator Favourite Favourites Profile. Account
Main navigation.
Store pin.
Brewers primary logo Brewers Royal Warrant logo
Profile.
0 Basket.

RC46 Fastrac Rust Converter White 1L

Product Code: BL043615N
Loading ... Expand image

RC46 Fastrac Rust Converter White 1L

Product Code: BL043615N
Trustpilot

A single pack water thinned, air drying, rust converter

£51.49 Inc VAT £42.91 Exc VAT
Quantity
Counter minus. Counter plus.
Check store stock
Collection branch.
Delivery
Delivery Van.
Estimated delivery:
Free next day delivery
£51.49 Inc VAT £42.91 Exc VAT
Bradite RC46 Fastrac Rust Converter is a single pack water thinned, air drying, rust converter, pigmented with zinc phosphate anticorrosive pigments. 
This rust converter has a water resistant film with good anticorrosive properties and is suitable for wire brushed and hand abraded steel surfaces. Suitable for use on structural steel and machinery, can be applied over slightly damp surfaces.

Touch dry in up to 1 hour and recoatable after 1-4 hours.
Size
1L
Barcode
5050173031023
Application Methods
Airless Spray, Brush, Roller
Coverage
Up to 20sq/m per litre
VOC level
Low
Thinning
Water
Touch dry
Up to 1 hour
Recoatable
1-4 hours
Colour
White
Finish
Eggshell
Cleanup
Water & Detergent
Base
Water-Based
Trustpilot

Data Sheets

Additional Information

Bradite paints and coatings meet the highest quality and performance standards in the most demanding environments. To obtain satisfactory results you should ensure you know the best way to use the product. Free advice is available upon request from Bradite Paints and its distributors. General advice given below does not constitute a specification.

Preparation

Particular consideration should be paid to surface preparation, temperature and dryness of substrate. Surface should be dry, clean and to the specified standard.

Application

  • Paints and coatings may require thinning to ease application on absorbent substrates or to accommodate adverse climatic conditions.
  • Do not apply coatings when the temperature of the substrate is below 3°C above dew point, to avoid surface condensation affecting the coating as it dried.
  • Be sure to follow guidance on drying times before overcoating and hand over.