Bedec Aqua Advanced Gloss is a high quality, quick drying, non yellowing Acrylic / Polyurethane Enamel for interior and exterior use.
Ensure surfaces to be painted are clean, dry and free from dust, dirt, grease and wax. Remove all loose and defective paint. On existing or shiny surfaces thoroughly rub down with abrasive paper.
Touch dry in 30 minutes and recoatable after 4 hours. Covers up to 15sq/m per litre.
- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Up to 15sq/m per litre
- VOC level
- Touch dry
- Up to 1 hour
- 4-8 hours
- Suitable for...
- Interior and exterior use
- Brilliant White
- Colour type
- Water & Detergent
* Colours on screen may vary from actual paint
Bedec Aqua-Advanced Gloss Brilliant White is available in 1 colours from the Bedec Colour Cards.
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Ensure the surfaces to be painted are clean dry and free from dust, dirt, grease and wax. Remove all loose and defective paint. Algal and fungal growths should be removed and treated with a fungicidal wash.
Smooth glossy surfaces should be lightly abraded to provide a key.
Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and check colour before use. Do not apply at air or surface temperatures below 8°C or when likely to rain before the paint has fully dried.
On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly. Do not over spread.
Clean up immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.